Samsung Galaxy S9 SM-G960U T-Mobile Firmware Version G960USQU2ARC6 Android Oreo 8.0 Flashing Guide and Download

Samsung S9 was recently launched and here is the latest stock firmware based on Android 8.0. This is the official Firmware without any modification from the carrier. This firmware is only for the Samsung Galaxy S9 SM-G960U on T-Mobile USA. This will upgrade your Samsung device to the latest Android Oreo. You can flash this Firmware using Odin.

Remember this will work only with Samsung Galaxy S9 SM-G960U on T-Mobile USA and not on any other device. Be sure to check your device model and carrier based on the country before flashing the Firmware.

Smart Switch is similar to the older Kies but made specifically for the new generation devices from Galaxy Note III with Android 4.3 and above.

Download Samsung Smart Switch

We recommend Smart Switch as it is the official Samsung software and it automatically downloads your device USB Drivers for you to keep them handy during flashing.

How to Flash your Samsung Galaxy S9 on T-Mobile USA to latest Firmware

Step 1: Download the .zip file from the link below that contains the official Firmware and extract it on your PC or Mac

Download Links for Firmware
Mirror 1	Rapidgator Link
Mirror 2	AlfaFile Link

Step 2: Download Odin from the Link

Step 3: Extract the Odin file downloaded and install it on your PC

Step 4: Reboot your Phone to download mode by pressing Home+ Power+ Volume Down buttons together

Step 5: Connect your phone to PC

Step 6: Open Odin and wait for a blue tick on Odin

Step 7: Select AP/PDA on the Odin and choose the firmware file you extracted earlier

Step 8: Uncheck the repartition option in the tool

Step 9: Click start and allow the flash to complete

Step 10: The phone will reboot automatically, if not enter into recovery mode and select factory reset option

This will confirm the flashing on your device and your device will now be running the official 8.0 Firmware.

Note: Flashing is only recommended if you know what you are doing. We take no responsibility if your device behaves improperly. Firmware are device specific and will not work with other devices. If you are not sure about Flashing, it is better to wait for official OTA updates.